PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.12"(H) x 3.6"(W) x 5.75"(L)

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: .81"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............HP-LP-B
Bone ................HP-LP

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............HP-9VB-B TEMP OUT
Bone ................HP-9VB  TEMP OUT

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............HP-4AA-B
Bone ................HP-4AA

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.12"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............SH-B
Bone ................SH

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: .81"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............SH-LP-B
Bone ................SH-LP

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............SH-9VB-B
Bone ................SH-9VB

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............SH-4AA-B
Bone ................SH-4AA

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.12"(H) x 4"(W) x 7.5"(L)

Color/Part #:
Black ...............HPL-B
Bone ................HPL

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29"(H) x 4"(W) x 7.5"(L)

Color/Part #:
Black ...............HPL-9VB-B
Bone ................HPL-9VB

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black.
Outside Dimensions: 1.29"(H) x 4"(W) x 7.5"(L)

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.12/1.92"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............HPS-B
Bone ................HPS

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: .81/1.61"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............HPS-LP-B
Bone ................HPS-LP

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29/1.92"(H) x 3.6"(W) x 5.75"(L)

Color/Part #:
Black ...............HPS-9VB-B
Bone ................HPS-9VB

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29/1.92"(H) x 3.6"(W) x 5.75"(L)

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.12/1.92"(H) x 4"(W) x 7.5"(L)

Color/Part #:
Black ...............HPLS-B
Bone ................HPLS

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: .81/2.26"(H) x 4"(W) x 7.5"(L)

Color/Part #:
Black ...............HPLS-9VB-B
Bone ................HPLS-9VB

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit.

These enclosures include a top and bottom cover.  Available
with either a 9 volt or 4 "AA" battery compartment.  Available
in Black and PC Bone.
Outside Dimensions: 1.29/2.26"(H) x 4"(W) x 7.5"(L)

Color/Part #:
Black ...............HPLS-4AA-B
Bone ................HPLS-4AA

Keypad: 4" x 6"
Matrix Enclsoures 3.6" x 5.75" x 1.29"

Consists of standard membrane switch and enclosure.
Switches features steel-dome tactile membrane and
printable overlay with ribbon cable and connector.  Rugged
enclosures have cable slot opening, 9 volt battery compartment
and are recessed to accept membrane switches.
Black in color.

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

The smallest enclosures in the PacTec line.  The HM
and HML series kits are composed of three pieces:
top cover, bottom cover and front panel.  The JM series
are composed of four pieces:  top cover, bottom cover,
front panel and rear panel.  Available in Black and
PC Bone.
Outside Dimensions: 1"(H) x 2.4"(W) x 2.27"(L)

Color/Part #:
Black ...............JM22-B
Bone ................JM22

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

The smallest enclosures in the PacTec line.  The HM
and HML series kits are composed of three pieces:
top cover, bottom cover and front panel.  The JM series
are composed of four pieces:  top cover, bottom cover,
front panel and rear panel.  Available in Black.
Outside Dimensions: 1"(H) x 2.4"(W) x 3.8"(L)

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

The smallest enclosures in the PacTec line.  The HM
and HML series kits are composed of three pieces:
top cover, bottom cover and front panel.  The JM series
are composed of four pieces:  top cover, bottom cover,
front panel and rear panel.  Available in Black and
PC Bone.
Outside Dimensions: .9"(H) x 2.4"(W) x 3.8"(L)

Color/Part #:
Black ...............HM-B
Bone ................HM

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

The smallest enclosures in the PacTec line.  The HM
and HML series kits are composed of three pieces:
top cover, bottom cover and front panel.  The JM series
are composed of four pieces:  top cover, bottom cover,
front panel and rear panel.  Available in Black and
PC Bone.
Outside Dimensions: 1"(H) x 2.4"(W) x 3.8"(L)

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

The smallest enclosures in the PacTec line.  The HM
and HML series kits are composed of three pieces:
top cover, bottom cover and front panel.  The JM series
are composed of four pieces:  top cover, bottom cover,
front panel and rear panel.  Available in Black and
PC Bone.
Outside Dimensions: .9"(H) x 2.75"(W) x 4.6"(L)

Color/Part #:
Black ...............HML-B
Bone ................HML

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

The smallest enclosures in the PacTec line.  The HM
and HML series kits are composed of three pieces:
top cover, bottom cover and front panel.  The JM series
are composed of four pieces:  top cover, bottom cover,
front panel and rear panel.  Available in Black and
PC Bone.
Outside Dimensions: 1.4"(H) x 2.75"(W) x 4.6"(L)

Color/Part #:
Black ...............HML-ET-B
Bone ................HML-ET

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

The smallest enclosures in the PacTec line.  The HM
and HML series kits are composed of three pieces:
top cover, bottom cover and front panel.  The JM series
are composed of four pieces:  top cover, bottom cover,
front panel and rear panel.  Available in Black and
PC Bone.
Outside Dimensions: 1.5"(H) x 2.75"(W) x 4.6"(L)

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

Lightweight and exceptionally durable.  CM series
kits are composed of four pieces:  top cover, bottom
cover, front and rear panels.  Available in Black and
PC Bone.
Outside Dimensions: 1.75"(H) x 3.33"(W) x 5.25"(L)

Color/Part #:
Black ...............CM3-150-B
Bone ................CM3-150

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

Lightweight and exceptionally durable.  CM series
kits are composed of four pieces:  top cover, bottom
cover, front and rear panels.  Available in Black and
PC Bone.
Outside Dimensions: 1.5"(H) x 5.08"(W) x 5.25"(L)

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

Lightweight and exceptionally durable.  CM series
kits are composed of four pieces:  top cover, bottom
cover, front and rear panels.  Available in Black and
PC Bone.
Outside Dimensions: 2.25"(H) x 5.08"(W) x 5.25"(L)

Color/Part #:
Black ...............CM5-200-B
Bone ................CM5-200

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

Lightweight and exceptionally durable.  CM series
kits are composed of four pieces:  top cover, bottom
cover, front and rear panels.  Available in Black and
PC Bone.
Outside Dimensions: 2.5"(H) x 6.08"(W) x 6.25"(L)

Color/Part #:
Black ...............CM6-225-B
Bone ................CM6-225

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

Lightweight and exceptionally durable.  CM series
kits are composed of four pieces:  top cover, bottom
cover, front and rear panels.  Available in Black and
PC Bone.
Outside Dimensions: 3.25"(H) x 6.08"(W) x 6.25"(L)

Color/Part #:
Black ...............CM6-300-B
Bone ................CM6-300

PacTec series instrument enclosure kits are constructed
of molded ABS plastic. (94HB - 1/8" thick)  All kits are
individually packaged and include all assembly hardware
needed to built a prototype kit

Lightweight and exceptionally durable.  CM series
kits are composed of four pieces:  top cover, bottom
cover, front and rear panels.  Available in Black and
PC Bone.
Outside Dimensions: 1.56"(H) x 5.57"(W) x 8.78"(L)

Color/Part #:
Black ...............CM59-135-B
Bone ................CM59-135