8-1/4" x 2-1/8" x 1-1/8"
Working voltage 12-18
VDC.  Operating voltage
14.3 VDC @ 300-400 mA.
Can be wired for Hi or Low
brightness by the 3 pin plug.
Two incandescent lamps that
are on simultaneously with
the LEDs in the low brightness.
28 individual LEDs
2 reflectors, one on each end.
 (3 wire harness not included)

Mfg. - AIS (for HP)
Mfg. # - HEDS-3050
Digital bar code scanner.
Consists of a self-contained
700NM red LED and
matching sensor, amplifier
and digitizer.  CMOS/TTL
open collector output,
single 5 VDC operation.
.3mm resolution.  3"3" cord
with RJ-12 modular connector.
Includes spec sheet.

Powered by three SR44
coin cell batteries (included).
Besides the adjustable light,
this lightweight unit features
a 1-3/4" spring-close clip-on
base and an on/off switch to
save batteries when not in
use.  Approx. 365 hours of
use per set of batteries.

Color/Part#:
Green ....................25-523/G
Blue .......................25-523/B
Red ........................25-523/R

Comes complete
with 3 A357 coin
cells.  The LED
head has a 4"
flex neck, Push-on
& Push-off button
on side of case.

Mfg. - Oshino, # - OL -3071
.156" dia. x .360"
5 VDC 60 mA, 15MSCP. T-1 Sub - Midget
Flanged Base. Commonly used in avaition.

Type: PR13
Voltage: 4.75V nominal, .50 amps
light output: 25 lumens. Rated life: 15hrs
@ 4.75v. SC Midget Flange base. This
lamp is most commonly found in 6v
lanterns and 4-cell flashlights.

.22" dia x .56" h w/ 1" leads
Minimum striking voltage: approx. 65-70
VAC. Operating voltage: 120VAC. Note:
an external current limiting resistor of 33K
Ohms must be used in series with this lamp.

12' x 7-1/2' x 1-3/4'
Durable, UV Stable thermoplastic white
housing.  Universal, easy snap installation.
Replaceable chevrons, canopy included along
with bulbs, wiring, mount and complete instructions
for installing.

Part #/Color:

25-527 ...............Red
25-528 ...............Green

2-1/4" x 3/4" x 7/8"
One yellow, six red and a
bipolar (red/green).  Can be
used as is or taken apart.

Super bright red LED keychain
light.  Runs on (2) AG10 batteries
(included).
White case with 1-1/2" long chain
and key ring.

Mfg. - OSHINO
14 VDC @ 20 mA. 6mm LED dia.,
bi-pin base. Typical luminous intensity:
Super red & yellow 70 IV (CD/M),
green 110 IV (CD/M).

Colors and part numbers:

Super Red.........25-242
Yellow................25-243
Green................25-244

.115" x .055" x .05"
(1mm lens dia.) Gold plated mounting
surfaces for super conductivity

Sold in pack/10
$ .29/pack

Mfg. - ROHM
Mfg. # - SLL-5080ML
2-1/4" dia. x 1-1/2" deep
High bright red and green
lamp.  Common anode -
14 high intensity red LEDs
(12 VDC @ 20mA); 36 high
intensity green LEDs (20 VDC
@ 100mA).  Waterproof
structure.  High visibility.
Peak emission wavelength:
Red 650nm, Green 565nm.  Min.
luminosity:  Red 5.6cd, Green
2.3cd.  Red and green can be
lit independently or simultaneously.
Includes removable black lens
cover.  12" long color-coded
hook-up wires.

Introducing Hyper LEDs.  This Galium Nitride
LED represents the latest breakthrough technology
in LED lighting.  At 3.6 CD this  LED will shower
the interior of your vehicle with blue light.  Designed
to replace existing alarm LEDs, for use with or
without alarm systems.  Galium Nitride technology.
3 ft. Long, Hook-up 12 VDC, 15 mA.