Bases

Standard Base

Mfg. # 300
The patented single load control knob and
exclusive split-ball feature firmly locks the head
into place. Holds all 300 series heads. This base
has three 1/4" (6mm) countersunk mounting holes
on a 4-5/16" (111mm) bolt circle for attaching
directly to a work bench or to a portable Base
Mount. Accepts all 5/8" (16mm) stems. Overall
height is 3 3/4" (96mm).

74-397

Wire Manager

Mfg. # 358
The Universal Holder is a handy time-saver
designed exclusively for the 366 Wide Opening
Head. It neatly separates and holds wire leads or
solder right at your fingertips. The tempered coil
spring is also a convenient place to keep small
tools close at hand. Pivots away from the jaws
when not in use. Attaches easily to the stem of
the 366 Wide Opening Head where it remains
stationary as the jaws are opened or closed.

74-542

Bench Clamp

Mfg. # 311
The 311 Bench Clamp Base Mount clamps to the
edge of any work bench or table up to 3- 7/16"
(88mm) thick. For use with the 300 Standard Base
and the 305 Low-Profile Base. Four neoprene pads
are included and may be used when additional
anti-slip characteristics are desired without
excessive tightening of the clamping screw.
Three screws and nuts are included for mounting a
base to the Bench Clamp.

74-401

Tool Vise Magnetic Base

Mfg. # 311
The 311 Bench Clamp Base Mount clamps
to the edge of any work bench or table up
to 3- 7/16" (88mm) thick. For use with the
300 Standard Base and the 305
Low-Profile Base. Four neoprene pads are
included and may be used when additional
anti-slip characteristics are desired without
excessive tightening of the clamping
screw. Three screws and nuts are
included for mounting a base to the Bench
Clamp.

74-543